-
LED Light (Auto Super Illuminator)
A light emitting diode is used to illuminate the face/display. Super Illuminator uses high-brightness LED for easier reading
-
Acceleration Measurement
A built-in acceleration sensor detects arm movement, when walking, which is used to count the number of steps taken. With some models, measured data is also used to calculate energy consumption
-
Temperature Measurement
A built-in temperature sensor measures the temperature
-
World Time (R48)
Displays the current time in major cities and specific areas around the world. R: Current time in major cities around the world. Values indicate number of cities/areas
-
Daily Alarm, Hourly Time Signal (5)
The daily alarm sounds each day at the time you set. The value indicates how many alarms are available. The hourly time signal causes the watch to beep every hour on the hour
-
Snooze Feature
Each time you stop the alarm, it sounds again after a few minutes
-
Stopwatch (1/100 24HR)
Accurate measurement of elapsed time with the touch of a button. The fraction indicates the unit of measurement, while the time figure indicates the maximum time measurement
-
Timer (60 MIN)
Counts down from a start time specified by you. The value indicates the number of timers available, while the time figure indicates the maximum starting time. “REPEAT” indicates Auto Repeat, which automatically restarts timing at the end of each countdown
-
Full Auto-Calendar
Allowances are made automatically for months of different lengths, including leap year
-
12/24-Hour Timekeeping
Times can be displayed in either 12-hour or 24-hour format
-
Operation Tone On/Off
The tone that sounds to signal a mode change or other operation can be turned on and off
-
Battery Level Indicator
Indicator shows the current battery level
-
Shock Resistant
Shock-resistant construction protects against impact and vibration
-
Mud Resistant
Dirt and mud-resistant construction keeps mud and dirt from getting into the watch
-
Neobrite
A luminous coating provides long-term illumination in the dark after only short exposure to light
-
Water Resistant (20 BAR)
The “BAR” value indicates the number of atmospheres to which water resistance is ensured. 20 BAR means water resistance to 20 atmospheres. Watches marked “200m” have the same water resistance as 20 BAR watches
-
Mineral Glass
Hard glass resists scratching
-
Band
Resin
- Case / bezel material: Resin
- Resin Band
- Neobrite
- Mineral Glass
- Mud Resistant
- Shock Resistant
- 200-meter water resistance
- Double LED light
LED light for the face (Auto LED light, Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow)
LED backlight for the digital display (Auto LED light, Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow) - World time
38 time zones (38 cities + coordinated universal time), daylight saving on/off, Home city/World time city swapping - Sunrise, sunset time display
Sunrise time and sunset time for specific date - 1/100-second stopwatch
00’00”00~59’59”99 (for the first 60 minutes)
1:00’00~23:59’59 (after 60 minutes)
Measuring unit:
1/100 second (for the first 60 minutes)
1 second (after 60 minutes)
Measuring modes: Elapsed time, split time, 1st-2nd place times - Countdown timer
Measuring unit: 1 second
Countdown range: 24 hours
Countdown start time setting range: 1 second to 24 hours (1-minute increments and 1-hour increments) - 5 daily alarms
- Hourly time signal
- Hand shift feature
- Full auto-calendar (to year 2099)
- 12/24-hour format
- Button operation tone on/off
- Regular timekeeping
Analog: 3 hands (hour, minute (hand moves every 10 seconds), second)
Digital: Hour, minute, second, am/pm, month, date, day - Accuracy: ±15 seconds per month (with no mobile link function)
- Approx. battery life: 2 years on CR2025
- Size of case: 56.2 × 54.9 × 17.3 mm
- Total weight: 88g
- Module: 5562