G-Shock Classic Watch featuring Shock resistance, 200M WR, countdown timer, 1/100 sec. stopwatch and auto-calendar. Black resin band digital watch with neutral face.
-
EL Backlight
An electro-luminescent panel causes the entire face to glow for easy reading. lncludes an After-Glow feature that keeps the EL backlight turned on for a few seconds after the light button is released
-
Multi-Function Alarm, Hourly Time Signal
Multi-function alarms can be configured to sound on a particular date, a particular day of the week, or at the same time each day. The number indicates the number of alarms. The hourly time signal causes the watch to beep every hour on the hour
-
Stopwatch (1/100 24HR)
Accurate measurement of elapsed time with the touch of a button. The fraction indicates the unit of measurement, while the time figure indicates the maximum time measurement
-
Timer (REPEAT 24H)
Counts down from a start time specified by you. The value indicates the number of timers available, while the time figure indicates the maximum starting time. “REPEAT” indicates Auto Repeat, which automatically restarts timing at the end of each countdown
-
Full Auto-Calendar
Allowances are made automatically for months of different lengths, including leap year
-
12/24-Hour Timekeeping
Times can be displayed in either 12-hour or 24-hour format
-
Shock Resistant
Shock-resistant construction protects against impact and vibration
-
Water Resistant (20 BAR)
The “BAR” value indicates the number of atmospheres to which water resistance is ensured. 20 BAR means water resistance to 20 atmospheres. Watches marked “200m” have the same water resistance as 20 BAR watches
-
Mineral Glass
Hard glass resists scratching
-
Band
Resin
| Shock Resistant |
| 200 Meter Water Resistant |
| EL Backlight with Afterglow |
| Flash Alert Flashes with buzzer that sounds for alarms, hourly time signal, countdown timer time-up alarm |
| 1/100 second stopwatch Measuring capacity: 00’00”00-59’59”99 (for the first 60 minutes) 1:00’00-23:59’59 (after 60 minutes) Measuring unit: 1/100 second (for the first 60 minutes) 1 second (after 60 minutes) |
| Measuring mode: Elapsed time, split time, 1st-2nd place times |
| Countdown timer Measuring unit: 1 second Countdown range: 24 hours Countdown start time setting range: 1 second to 24 hours (1-second increments, 1-minute increments and 1-hour increments) Other: Auto-repeat |
| Multi-function alarm |
| Hourly time signal |
| Full auto-calendar (pre-programmed until the year 2039) |
| 12/24 hour formats |
| Accuracy: +/- 15 seconds per month |
| Battery CR2016 |
| Approx. battery life: 2 years |
| Module 1289/3230 |
