This new addition to the PRO TREK Multi-Field line comes with a highly readable STN LCD that enhances readability. A silicon band provides a better fit to the wrist and the large rotary bezel creates a design that is bold, even for a PRO TREK model
![](https://vendorgrove.com/wp-content/uploads/2019/07/IMG_2577-712x667.jpg)
-
Atomic Timekeeping
Shows accurate time by receiving radio signals of standard time information. JJY= Corresponds to both of Japanese standard waves JJY (40kHZ/60kHZ); WWVB= Corresponds to the USA standard wave WWVB (60kHz); MSF/DCF77= Corresponds to UK and Germany standard waves MSF/DCF77(60kHz/77.5kHz); BPC= Corresponds to Chinese standard wave BPC (68.5kHz)
-
Solar Power
A solar cell provides power for operation
-
Compass
A built-in direction sensor detects magnetic north
-
Altitude Measuremen
A built-in pressure sensor measures barometric pressure, which is converted to relative altitude
-
Barometric Pressure Measurement
A built-in pressure sensor measures barometric pressure, which is shown on the display
-
Temperature Measurement
A built-in temperature sensor measures the temperature
-
Auto-Hand Location
Using an LED, the positions of the hour, minute and second hands are checked at the 55'00" of every hour to ensure correct hand positioning. If the hand time does not coincide with the counter within the IC, the movement corrects the hand position automatically
-
Low Temperature Resistant -10°C/14°F or -20°C/-4°F (-10°C/14°F)
The timekeeping module is designed for operation at very low temperatures. The value indicates the lowest temperature at which the module will operate. *-10°C/14°F or -20°C/-4°F do not apply to the direction sensor
-
LED Light (Full Auto Light Super Illuminator)
A high-brightness diode is used to illuminate the face of the watch in one of a variety of colors: blue, green, light blue, pink, yellow, or white
-
Sunrise, Sunset Time Display
Sunrise and sunset times are displayed based on your current latitude and longitude
-
World Time (R48)
Displays the current time in major cities and specific areas around the world. R: Current time in major cities around the world. Values indicate number of cities/areas
-
Daily Alarm, Hourly Time Signal (5)
The daily alarm sounds each day at the time you set. The value indicates how many alarms are available. The hourly time signal causes the watch to beep every hour on the hour
-
Snooze Feature
Each time you stop the alarm, it sounds again after a few minutes
-
Stopwatch (1/10 1000HR)
Accurate measurement of elapsed time with the touch of a button. The fraction indicates the unit of measurement, while the time figure indicates the maximum time measurement
-
Timer (60 MIN)
Counts down from a start time specified by you. The value indicates the number of timers available, while the time figure indicates the maximum starting time. “REPEAT” indicates Auto Repeat, which automatically restarts timing at the end of each countdown
-
Full Auto-Calendar
Allowances are made automatically for months of different lengths, including leap year
-
12/24-Hour Timekeeping
Times can be displayed in either 12-hour or 24-hour format
-
Operation Tone On/Off
The tone that sounds to signal a mode change or other operation can be turned on and off
-
Battery Level Indicator
Indicator shows the current battery level
-
Water Resistant (20 BAR)
The “BAR” value indicates the number of atmospheres to which water resistance is ensured. 20 BAR means water resistance to 20 atmospheres. Watches marked “200m” have the same water resistance as 20 BAR watches
-
Mineral Glass
Hard glass resists scratching
-
Band
Resin
Multi-Band Atomic Timekeeping (US, UK, Germany, Japan, China) Receives time calibration radio signals which keep the displayed time accurate Auto receive function (up to 6 times per day/up to 5 times per day for China) Manual receive function Signal: US WWVB, UK MSF, Germany DCF77, Japan JJY40/JJY60, China BPC Frequency: US 60kHz, UK 60kHz, Germany 77.5kHz, Japan 40/60kHz, BPC 68.5kHz |
Tough Solar Power |
200M Water Resistant |
Low Temperature Resistant (-10 C / 14 F) |
Altimeter Measuring range: -700 to 10,000 m (-2,300 to 32,800 ft) Measuring unit: 1 m (5ft) Manual memory measurements (up to 30 records, each including altitude, date, time) Auto log data (High/low altitudes, auto cumulative ascent and descent) Trek log data (up to 14 records of high/low altitudes, auto cumulative ascent and descent of particular treks) Others: Relative altitude readings (–3,000 to 3,000 m), Selectable measurement interval: 5 seconds or 2 minutes. 1 second for first 3 minutes only. |
Digital Compass Measures and displays direction as one of 16 points Measuring range: 0 to 359 degrees Measuring unit: 1 degree 60 seconds continuous measurement Graphic direction pointer Bidirectional calibration and Northerly calibration function Magnetic declination correction Bearing memory |
Barometer Display range: 260 to 1,100 hPa (7.65 to 32.45 inHg) Display unit: 1 hPa (0.05 inHg) Atmospheric pressure tendency graph (past 42 hours of readings) Atmospheric pressure differential graphic Barometric pressure tendency information alarm (beep and arrow indicate significant changes in pressure) |
Thermometer Display range: -10 to 60 C (14 to 140 F) Display unit: 0.1 C (0.2 F) |
Full Auto LED (Super Illuminator) Backlight with Afterglow |
World Time 31 time zones (48 cities + UTC), city name display, daylight saving on/off |
Sunrise/Sunset Data Sunrise time and sunset time for specific date/ daylight pointers |
5 Daily Alarms (4 one-time and 1 snooze alarm) |
Hourly Time Signal |
1/10 Second Stopwatch Measuring capacity: 999:59’59.9″ Measuring modes: Elapsed time, split time, 1st-2nd place times Countdown Timer Measuring unit: 1 second Countdown range: 24 hours Countdown start time setting range: 1 minute to 24 hours (1-minute increments and 1-hour increments) |
Full Auto Calendar (Pre-programmed until the year 2099) 12/24 Hour Formats Button operation tone on/off Accuracy: ± 15 seconds per month (with no signal calibration) |
Storage Battery: Solar Rechargeable Battery |
Module 3444 |